DAMAGES

DESCRIPTION

CONCLUSION

BUBBLE

   - Tire has bubbles due to running in unsuitable conditions (incorrect pumping pressure, bad roads, more than 3 holes patched ...) or tire in use in case warranty bar runs out of

No change

    -   Tire is lumpy or soft, if cutting out the place we can see separated layers as cloth/cloth, cloth/rubber or steel belt/rubber.

Bias, Radial Tire:

Change if warrany bar is still available

TREAD WEAR CRACK

   - Crack at grooves of tread wear, total length of crack  ≥30mm (for tire hoop  ≤16); ≥60mm (for tire hoop  >16) or deep crack at steal belt

BLOWOUT

   - Explosion mark has bubble (top, section, tire body)

 

Change if warrany bar is still available

   - V-shaped explosion mark with steal belt is fired totally at site, being curdled and breakable.

No change

   - V-shaped explosion mark is close to hoop (from hoop to rim line) without hoop rubbing.

Change if warrany bar is still available

   - V-shaped explosion mark is at Rim line area, there is no bubble or trace to steal belt

   - Explosion mark has hoop explosion due to being rubbed

No change

   - Diagonal explosion, cross explosion, straight explosion V-shaped explosion outside hoop.

  - Short explosion with broken curtain facbrics (shoulder) towards the perimeter (due to under-inflated)

TORN STEAL BELT

   - If there are no punctures, cuts or bites by foreign objects.

Change if warrany bar is still available

   - If there are punctures, cuts or bites by foreign objects.

No change

   - Partial crack in curtain towards fabrics dimention without punctures, cuts or bites by foreign objects.

Change if warrany bar is still available

BROKEN STEAL BELT

   - Partial cuts in curtain without losing shape, no punctures, and tire does not lose it pressure.

   - Cuts in curtain with bubbles

Considering damages of bubbles, blowouts

   - Cuts in curtain towards the perimeter

No change

   - Partical cut in steal belt or the belt exiting away tire hoop, but it does not lose pressure, has no mark of patched, no change in shape of tire and there is no trace inside tire, no more than 2 patches

Change if warrany bar is still available

TIRE HOOP DAMAGE

   - Tire hoop is intact but one end of steal belt exits away.

Bias Tire:

Change if warrany bar is still available

   - Tire hoop is not scratched but broken or unfixed.

   - Tire hoop is stretched or bended

No change

   - Tire hoop is eroded due to belts

OTHER DAMAGES

   - Radial crack / section crack/ shoulder crack, hoop crack due to the insulation, not due to cuts, slashing.

   - Deep crack to steal belt or total length of cracks   ≥100mm (tire hoop ≤16), ≥200mm (tire hoop >16).

Bias, Radial Tire:

Change if warrany bar is still available

   - Crack, gap on tread

   - Tire has visual defect

   - Oval is not due to hoop, structure of vehical and tire is brand new, return to factory if tire is in use.

Change if warrany bar is still available

   - Defect due to improper usage (instruction paper)

No change

   - Repared tire with increasing size

No change

   - Repared tire with decreasing size

Considering changing according to regulations for other tire

   - Tire has fuzzy numbers, lack of digits or creating fake indictors on tires or no certificate of warranty.

No change

   -   Tire which is under dirty storage condition, becomes old due to period of the storage

   - Tire, which is kept exceeding 5 years as regulated period from manufacturing date.

No change